The Label Paper for PM241-BT
1.Paper types
PM241BT is a Bluetooth shipping label printer. It supports three types of paper: Gap Label; Black Mark Label; Continuous Paper.
Among them, Gap Label is divided into Folding type and Roll paper type (as shown in the picture)
Black Mark Label is mostly Roll paper type (as shown in the picture)
Continuous Paper is Roll paper type (as shown in the picture)
2.Paper sizes
The label paper width sizes compatible with the PM241-BT printer is from 25.4 to 118 mm（1-4inch）
3.Some label papers purchase links (taken from Phomemo brand official website)
If you have any questions about the label paper, please contact us via email：bestservice2012@outlook.com
Related Articles
How to Ensure PM-241-BT/PM-246S Feeding Paper Correctly
Feeding the printer paper to the correct position is the first step to ensure normal printing. Please check whether the following steps are completed. This article also applies to models with similar structures:PM-245-BT/PM-249-BT series. 1.Use the ...【PM-241-BT】Labelife APP Alert for the Note of Paper Jam
Please follow the steps below to enable the printer to feed paper normally. This article also applies to models with similar structures:PM-245-BT/PM-249-BT series. 1. Print side facing up Make sure your labels are properly loaded with the print side ...Reasons for PM-241-BT/PM-246S Flashing Blue Lights
The blue light flashes or the blue light flashes when you click Print: This is usually caused by a paper jam or the dust/contaminants are affecting the Print Head. Please follow the steps below to enable the printer to feed paper normally. This ...Reasons for PM-241-BT/PM-246S Flashing Red Lights
Slowly flashing red light indicates the printer cover is not closed.Please close the printer cover tightly again.Quickly flashing red light indicates a lack of paper. Please refer to the following steps to restore the printer to normal printing ...【Labelife】How to Check Paper Status for PM241-BT Printer
If you encounter such an error message when printing with a printer on the Phone Labelife APP, please follow the steps below to check our operation. 1. Please check if there is any dirt on the print head of your printer. Turn off the power of the ...