[M832] Supported Print Sizes and Print Demonstration

[M832] Supported Print Sizes and Print Demonstration

1. Printer Suppored Sizes:

The M832 printer supports the following sizes: US Letter (216mm), A4 (210mm), 4.33" (110mm), 3.14" (80mm), and 2.08" (53mm).

You can use the built-in "Adjustable Baffle" in the printer's paper bin to adjust the width of the paper as needed.

2. If you are using Phomemo App to Print.

Navigate to the home page, select the appropriate paper roll, and load the print paper.


Please check the demo video below:

3. If you are using Windows to Print.

Go to the Windows Control Panel, right-click on the "M832" driver, then select Preferences > Page Setup to choose the paper size you want to print.

4. If you are using macOS to Print.

Select a document and try to print. Click on "Paper Size," choose the appropriate size, and proceed with printing.

5. If you're still unsure how to proceed with multi-size printing, please contact our support team.



    • Related Articles

    • [M08F] Supported Consumable Types and Sizes

      1. Suppored Consumable Types The M08F is a thermal printer, which produces content by heating thermal paper as it pass through the print head. Therefore, the M08F requires thermal paper; regular paper without a thermal layer is not compatible. ...

    • A4 Printer FAQs (for M832 Series & A282M)

      M832 & M833 & M834 & M835 & A282M The following troubleshooting steps take the M832 as an example. Printer Issues: Q1: How to Prevent Blank Printouts Q2: How to Improve Print Quality Paper Loading Issues: Q1: How to install the paper roll correctly. ...

    • [Tattoo Print] How to Enhance Tattoo Print Quality

      1. Maintain a High Battery Level for the Printer. To avoid compromised print quality, keep the printer's battery sufficiently charged. Should the battery level fall below 30%, we recommend charging it for 2 hours prior to printing. The printer's ...

    • [M832] How to Improve Print Quality

      1. Maintain a High Battery Level for the Printer. To avoid compromised print quality, keep the printer's battery sufficiently charged. Should the battery level fall below 30%, we recommend charging it for 2 hours prior to printing. The printer's ...

    • A4 Printer FAQs (for M08F Series, M832 Series, P831 Seriser, Tattoo Printing etc)

      Note: This FAQ work for the following model: 1. General FAQ Q1: How to find the printer's serial number (SN)? Q2: How to Connect Printer via Bluetooth to Mobile Devices 2. M08F Printing Issues: Q1: How to Prevent Blank Printouts Q2: How to Prevent ...