How to get the best printing effect of barcode

How to get the best printing effect of barcode

1.Printing from a phone

Please download the Labelife software from the Google Store or Apple Store.After the printer is successfully connected to the Labelife, please follow the steps below to adjust your print quality to 4 and print speed to 2.

 

2.Printing from a computer

2.1 Windows：

2.1.1 Windows Driver Printing：




2.1.2 Printing from Labelife software for Windows:



2.2 Mac：

2.2.1 Mac Driver Printing

Select the shipping label you want to print and follow the steps below:




2.2.2 Printing from Labelife software for Mac:




    • Related Articles

    • How to Get High-quality Printing Results for D520-BT

      1.Use the original power adapter Check whether the machine's power adapter is original. Please ensure that the power adapter used is original（output 24V-2.5A） 2.Clean the Printer Head Open the cover and clean the Printer Head with alcohol pads (Any ...

    • [PM241BT]How to get high-quality printing results

      This article also applies to models with similar structures:PM-245-BT/PM-249-BT series. 1.Use the original power adapter Check whether the machine's power adapter is original. Please ensure that the power adapter used is original（output 24V-2.5A） ...

    • [P831] How to Enhance the Printing Quality

      1. Maintain a High Battery Level for the Printer Please check the battery level of the printer. If it is lower than 30%, the printing performance of the printer may be affected by the power level. Please charge it in time. You can go to the mobile ...

    • Place the Printing Paper/Tape

      1. Printers with removable shaft Relevant printer series: M02 Series/M03 Series/M04 Series/T02 Series/M220/M100/M150/M110/M120/D520-BT The placement steps for the paper roll in this type of printer are as follows: 1. Prepare the Paper Roll: Ensure ...

    • [PM241BT]How to Avoid Printing Blank Content

      1. Make sure your labels are “Thermal paper” and the print side is facing up Please make sure the tear-off side of the label is facing up. 2.Please make sure you are using the original 24V-2.5A power adapter 3. Reset the printer 3.1 Press the button ...