How to Adjust Settings of PM241-BT
If you encounter problems with language, label settings, or font adjustment when using the Labeife mobile app or Labelife computer software, you can check the relevant information below.
1.Change the language of Labelife software
on Phone:
on Computer：
2.Label settings (how to change the paper type and size, and switch the size unit)：
on Phone:
If you want to switch between dimension units (inch-mm/mm-inch)
on Computer：
If you want to switch between dimension units (inch-mm/mm-inch)
3.Labelife software font adjustment（Font types and size）
on Phone:
on Computer：
Related Articles
How to Ensure PM-241-BT/PM-246S Feeding Paper Correctly
Feeding the printer paper to the correct position is the first step to ensure normal printing. Please check whether the following steps are completed. This article also applies to models with similar structures:PM-245-BT/PM-249-BT series. 1.Use the ...Reasons for PM-241-BT/PM-246S Flashing Blue Lights
The blue light flashes or the blue light flashes when you click Print: This is usually caused by a paper jam or the dust/contaminants are affecting the Print Head. Please follow the steps below to enable the printer to feed paper normally. This ...Reasons for PM-241-BT/PM-246S Flashing Purple Lights
Quickly flashing purple light indicates printing pause. If the printer cannot print normally after clicking the paper feed button, there may be a poor connection with the printer that causes printing to be paused. This article also applies to models ...Reasons for PM-241-BT/PM-246S Flashing Red Lights
Slowly flashing red light indicates the printer cover is not closed.Please close the printer cover tightly again.Quickly flashing red light indicates a lack of paper. Please refer to the following steps to restore the printer to normal printing ...What to do if Labelife(PC) do not Detect the PM-241-BT Printer by USB Port?
1.Connect to another USB port on your computer Re-plug the cable connected to the computer or connect it with another USB port. 2.Reinstall the driver Reinstall the driver and repeat step one. Follow the steps below to reinstall the driver: Before ...